理士蓄电池太阳能电池机房通讯站咨询报价

理士蓄电池5G通讯站机房**大量现货详细内容
6-GFMJ系列胶体阀控密封蓄电池
6-GFMJ Series Gel VRLA Battery
一、产品执行标准Product Standards
6-FMJ系列胶体阀控密封蓄电池从50—200Ah共9个规格，性能指标达到或部分**过德国DIN 43534、43539-5标准。
Regarding 6-FMJ series gel VRLA battery, there are 9 specifications from 50 to 200Ah in total, the performance parameters reach or partially exceed German Standard DIN 43534 and 43539-5.

二、产品主要用途Main Applications
☆	电信、移动、铁道等各种通信、信号系统备用电源；
Backup power supply for communication and ** systems such as telecommunication, China mobile and railway etc.
☆	电力系统、核电站备用电源，太阳能、风能发电储能；
Backup power supply for electric power system and nuclear power plant, energy storage of solar and wind power generation;
☆	UPS、医疗设备、应急照明等备用电源；
Backup power supply for UPS, medical equipment and emergency illumination etc.;
☆	舰船、海事等备用电源；
Backup power supply for vessels and maritime affairs;
☆	电动车辆用动力电源；
Power supply for driving electric vehicles.

三、产品特点Product Characteristics
☆	电池的电解质含有气相二氧化硅的胶体物质，呈凝胶状态，不流动、无漏露、无酸液分层现象，电池槽、盖采用ABS材料热封方式，使用、运输中无漏液的危险，安全可靠。
The battery electrolyte contains fumed silica, and there is no flow, no leakage or no gradation of acid liquor.  The battery slot and cover is made of ABS materials through hot seal.  There is no risk of leakage during the utilization and transportation, and it is safe and reliable.
☆	胶体电解质注入时为稀溶胶状态，采用过量电解质，可充满电池内所有的空间。电池在高温及过充电的情况下，不易出现干涸现象，胶体电池热容量大，散热性好，不易产生热失控现象，电池可在较为恶劣的环境下工作。
The gel electrolyte is in dilute sol state when being injected.  Excessive electrolyte can fill in all the space inside battery.  Under circumstance of high-temperature and overcharge, the battery will not dry out.  The gel battery has large heat capacity and good radiation  performance.  It is not easy to appear thermal runaway.  The battery can work under severe environment.
☆	较板板栅结构为放射状结构，有利于提高活物质的利用率。合金采用铅钙锡铝合金，正极板耐腐蚀性能好，负极板析氢电位高，铅膏配方*特，电池深放电后再充电的恢复能力较佳，有很好的循环耐久能力，容量足，寿命长。
   The grid of electrode plate is in radial structure, which is favorable for improving the utilization rate of active materials.  Pb-Ca-Sn-Al alloy makes the positive plate have a good performance of corrosion proof and makes the negative plate have a high over-voltage of hydrogen evolution.  Unique lead paste formula enables perfect recovery performance of battery recharging after deep discharging.  The battery has strong cycle and duration performance, sufficient capacity and long life.  
☆	隔板采用进口的胶体电池**PVC-SiO2隔板，其隔板孔率高，电阻低，电池内阻小。
   Imported PVC-SiO2 separator is used, which is clapboard special for gel battery.  It has porous structure and low resistance and the internal resistance of battery is low.
☆	较柱端子为镀锡铜端子结构，有利于电池的大电流的放电及电池间连接的可靠性。较柱的密封采用熔焊及树脂封合剂二次封合，密封可靠性高。
The terminal is in the structure of tin electrodeposited copper terminal, which is favorable for discharging battery with large current and is favorable for the reliability of connection between batteries.  The terminal is sealed through fusion welding and second seal of resin sealant, and the seal reliability is high.
☆ 接线端封闭式连接软线能有效防止因意外而发生的短路和遭受电击的危险。
The closed connection soft thread of terminal post can effectively prevent short circuit due to accidents or avoid risk of suffering from electric shock.

四、使用环境要求Environment  Requirements  
☆	海拔高度不**过4000m（海拔高度**过4000m使用时，需在订货时说明）
  The altitude shall not exceed 4000m（If the utilization altitude exceeds 4000m, it should be remarked during order.）
☆  环境温度：-20℃~+50℃（良好使用环境温度+20℃~+30℃）
Environmental temperature: -20℃~+50℃（environmental temperature for best utilization +20℃~+30℃）
☆	相对湿度≤90%
Relative humidity≤90%
☆	电池应远离火源、**溶剂，避免阳光直晒、同组电池使用环境温度一致。
The battery shall be far away from fire and organic solvent, and shall be protected from the sunshine.  The batteries in the same group shall be utilized at the same environmental temperature.
☆	浮充电压：20℃条件下 13.38—13.80V/unit，温度调节系数为－18mV/℃/unit
Float charging voltage: below 20℃, 13.38—13.80V/unit, the temperature adjustment coefficient is －18mV/℃/unit
☆	均充电压：14.28—14.52V/unit
Average charging voltage: 14.28—14.52V/unit
☆	大充电电流：0.20C10A。
Max. charging current: 0.20C10A。

五、主要技术指标Main Technical Parameters
☆	电池具有长使用寿命的特点，浮充运行8～10年（25℃），循环使用寿命长。
The battery has a long service life, it can operate under float charging for 8～10 years（25℃）, and the cycle service life is long.
☆	电池的自放电极低，在20℃时放置两年，自放电量小于额定容量的40%。
The self-discharge rate of the battery is very low.  When the battery is put aside for two years at 20℃, the self-discharged capacity is lower than 40% of the rated capacity.
☆	电池具有良好的深放电恢复能力，电池深放电后12小时内，可再充电到额定容量的95%。
The battery has strong ability to recover from deep discharging.  Within 12 hours after deep discharging, the battery can be charged to 95% of the rated capacity.
☆	气体复合效率**99%。
The gas recombination efficiency exceeds 99%.

六、产品基本参数Basic Parameters
电池
型号
Battery type	额定
电压
V
Rated voltage	额定容量
Aｈ(C10)
Rated capacity
Aｈ(C10)	大外型尺寸ｍｍ
Max. dimension ｍｍ	电池
质量
±2%Kg
Battery weight
±2%Kg	输出结构尺寸
Output structure size
			长
L	宽
W	槽高
Slot height	总高
Total height		
6-FMJ-50	12	50	276	175	166	187	22	
M8螺纹孔输出
M8 screwed hole output



6-FMJ-65	12	65	353	175	214	224	30	
6-FMJ-70	12	70	310	175	230	230	30	
6-FMJ-80	12	80	335	175	230	230	34.5	
6-FMJ-85	12	85	418	175	214	224	39	
6-FMJ-100	12	100	513	164	214	224	45	
6-FMJ-120	12	120	513	229	214	224	53	
6-FMJ-150	12	150	513	229	214	224	66	
6-FMJ-200	12	200	513	294	214	224	88	

七、电池主要电性能参数Main electric performance parameters 
1、终止电压为10.8V/unit时不同放电率下的放电电流 Discharge current at different discharge rate at end volt 10.8v/mi

电池型号
Type	放电时间Discharge time
	10＇	30＇	1h	3h	5h	8h	10h	20h
6-FMJ-50	74.8	40.5	28.1	12.2	8.0	5.7	5.1	2.5
6-FMJ-65	95.4	52.5	36.9	16.8	11.3	7.6	6.5	3.3
6-FMJ-85	124.9	75.5	48.2	22.4	14.8	10.0	8.5	4.3
6-FMJ-100	150.5	81.4	56.5	24.2	16.0	11.5	10.1	5.0
6-FMJ-120	155.2	102.5	66.8	28.8	19.5	13.3	12.0	6.0
6-FMJ-150	225.7	122.0	83.5	36.3	24.2	17.3	15.1	7.5
6-FMJ-200	301.0	162.9	112.9	48.5	32.0	23.0	20.2	10.1

2、	不同终止电压的单体恒功率放电表Single Battery Discharging at Constant Power at Different end Voltage (W)
2.1 恒功率放电记录  Discharging records at constant power   Uf=10.5V



  12V胶体恒功率放电记录   Discharging records at constant power   Uf=10.5V
放电
时间Discharging 
time
规格
型号
Type	5分钟5m	10分钟
10m	20分钟
20m	30分钟
30m	45分钟
45m	60分钟
60m
	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power
6-FMJ-50	1520	1125	870	680	535	420
6-FMJ-65	1882	1465	1024	835	623	493
6-FMJ-85	1941	1763	1237	1012	758	629
6-FMJ-100	2678	1819	1344	1089	816	674
6-FMJ-150	3565	2696	1907	1618	1371	1140
6-FMJ-200	4553	3584	2543	2157	1828	1520
放电时间
Dischar
Ging time
规格
型号
Stipulation
Type	5分钟
5m	10分钟
10m	20分钟
20m	30分钟
30m	45分钟
45m	60分钟
60m
	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power	放电功率
Discharging power
6-FMJ-50	1286	1050	810	650	515	410
6-FMJ-65	1673	1274	948	794	587	462
6-FMJ-85	1609	1403	1092	898	713	580
6-FMJ-100	2202	1699	1223	1056	806	657
6-FMJ-150	3143	2492	1950	1611	1351	1102
6-FMJ-200	4190	3241	2467	2100	1780	1470

 2.2  恒功率放电记录  Discharging records at constant power   Uf=10.8V

12V胶体恒功率放电记录    Uf=10.8V

3 长时放电容量(Ah) Long time discharging capacity (Ah)
型号
Type	C24	C48	C120	C240
	Uf=10.8V	Uf=11.1V
6-FMJ-50	57	60	66	72
6-FMJ-65	75	80	86	95
6-FMJ-85	98	106	113	122
6-FMJ-100	120	127	135	144
6-FMJ-120	138	146	159	173
6-FMJ-150	175	186	200	218
6-FMJ-200	230	248	269	288
注：环境温度为20℃。Note: the environmental temperature is at 20℃.

八、电池充放电曲线Charge & Discharge Curves
1  充电特性曲线 Charge Characteristic Curve 

 

2  不同放电率放电特性曲线Discharge Characteristic Curves at different Rate
 

3  放电容量与环境温度关系曲线Discharge Capacity VS Ambient Temperature Curve

 
4  充电电压与环境温度关系曲线Charge Voltage VS Ambient Temperature Curve